PlungeBox Setup

Get Ready to Chill

Setup Tutorial

FAQ

How do I clean it?

Drain the Tub: Begin by draining all the water from the tub. Depending on your setup, you may have a drain valve or may need to use a pump. Clean Surfaces: Once emptied, clean the surfaces of the tub. Use a non-abrasive cleaner that is safe on skin. Scrub Gently: Use a soft cloth or sponge to apply the cleaner. Gently scrub the interior surfaces, including the bottom, sides, and any seats or steps. Pay special attention to areas where biofilm (slimy layer) can form. Rinse Thoroughly: After scrubbing, rinse the tub thoroughly with clean water to ensure all cleaner residues are removed. Dry and Refill: Wipe down the tub with a clean, dry cloth to remove excess water and prevent water spots. Then, refill the tub.
How often do I need to clean the tub?

Regular Maintenance: Perform a basic cleaning (e.g., skimming debris, checking water clarity) before each use or weekly to maintain water quality. This also depends on how often you use the cold tub. Deep Cleaning: A more thorough cleaning, as described above, should be done every month or more frequently depending on usage. High usage or visible dirt/grime build-up might necessitate more frequent cleaning. Water Quality Checks: Test the water regularly for pH and sanitizer levels if you use chemicals to maintain water quality. Adjust as needed to maintain the recommended balance. Cover Your Tub: When not in use, keep your tub covered to prevent debris from falling in and to reduce the need for cleaning.